Hello,Welcome To The Official Website Of The DAQUAN Group!
Current Location:Home>News>Industry information

How to judge of lightweight partition board waterproof and seismic effect

Source:DQ   Date:2016/10/14 10:10:27

Partition board of environmental protection, lightweight partition board under the high temperature of 1000 degrees Celsius refractory limit more than 4 hours, and don't send out poisonous gas, non-combustible performance meet the national grade A standard.

Clapboard can increase the usable floor area, integral sex is good polystyrene particles sandwich board 75 mm wall materials commonly used energy-saving wall materials with 120 brick wall thickness less than 85 mm, that is to say, use energy-saving light partition board, each extension of 11.8 mm, can increase the usable floor area of 1 m. Due to the triad is fabricated construction, structure, board with board connected into a whole, shock resistance is 1.5 times that of the general masonry.

Clapboard in moisture-proof, waterproof insulation, experiments show that the partition board placed in, without any waterproof decorative surface with cement bond into a pool filled with water body, the back wall can keep dry, leaving no trace, also won't appear the condensed water bead in wet weather. Wall panels are professional waterproof board, has a good waterproof, moistureproof performance, can be used in wet area such as kitchen, toilet, basement.

Seismic phosphogypsum lightweight partition board is made up of non-hazardous disposal, lightweight steel slag, fly ash and other industrial waste residue composition, the frequency conversion steam pressure maintenance. With multiple environmental protection, light weight, high strength, heat preservation and heat insulation, sound insulation, breathing humidity, fire prevention, the advantages of fast construction, decrease the cost of the wall; Lightweight seismic wall because it is the use of disposal of phosphogypsum in wet process production, no need to phosphorus gypsum dewatering and drying processing, so don't need expensive equipment investment, therefore can light the advent of aseismic wall plate technology will unveil a new chapter, comprehensive utilization of phosphogypsum has outstanding environmental protection significance.

Lightweight triad structure seismic wallboard is prefabricated wall board itself, board with board connected into a whole, smooth and beautiful appearance, saving material and manpower, and the impact resistance test is 1.5 times that of the general gas, the overall seismic performance is higher than ordinary brick wall dozens of times, can satisfy the requirement of seismic intensity 8-9 building.

 


Address: new technology development zone, wuhan, hubei province SBI business street, 2 house 15 floor

Service area: hubei, hunan, jiangxi, henan, anhui, chongqing, sichuan province




Hot News
KeyWorks:

How to judge of lightweight partition board waterproof and seismic effect


All Rights Reserved:

http://www.dqwall.com/en/article-87.html Reprint Please Famous Sources

Hot Recommend